8
ENGLISH
L1020502 Quick start iAV control valve F | 25.10.2022)
Wiring in stand-alone operation (iAV as master)
RF components have a maximum free-field range of 350 metres� This
distance will be much less in a building because of obstacles� Therefore,
you will need to take objects such as walls, concrete and metal into
account� All slave components (except those which are battery powered)
also act as repeaters� Signals from components that are unable to make
a (strong) connection with the master component are forwarded auto-
matically via no more than one other component (= hop)� Please refer
to information sheet RF communication (L8000018) at www�duco�eu for
further information�
DUCO RF
Power Supply
230V AC
Frequency
868 Mhz
Maximum distance
350 m, free field (less through obstacles)
Maximum number of components Up to 25 wireless components in a single system
04
Mounting
04.A
Installing iAV Control Valve
Slide the iAV Control Valve into the iAV Housing until it clicks into place� Please refer to the casing manual for installation instruc-
tions on casing� When positioning the casing, allowance must be made for space to slide the valve in and out and to operate it easily
during installation� The valve is symmetrical and may be slid into the casing in any direction� Wiring can be connected to the printed
circuit board via the holes provided in the iAV casing�
04.B
Removing iAV Control valve
DO NOT DISCONNECT THE CABLES YET!
1� To be able to remove the iAV Control valve from the casing, the valve must be in the closed position� Briefly press the INST button
once to close the valve� The colour of the LED indicates the position of the valve, with bright white meaning 'open' and off mean-
ing 'closed'� When closing, the white LED will fade out�
2� Disconnect the wires now, not before�
3� Push in the two ribbed snaps in order to be able to slide the iAV Control Cover back out of the casing�
24 VDC
Max 25 RF
per iAV control
valve
