14
ENGLISH
L1020502 Quick start iAV control valve F | 25.10.2022)
07
Settings
Most of the factory settings for the network and the components will be satisfactory as they are, however, depending on the situa-
tion, it may be desirable to change some parameters, such as the CO
2
setpoint of an iAV Control valve� This can be done using the
Duco Network Tool�
This user-friendly software is the ideal way of changing settings and pinpointing problems in the system� The Duco Network Tool is
issued to every installer after attending a free training course at the Duco Academy� Please refer to our website or your Duco dealer
for further information�
ModBus
Via a ModBus connection, it is possible to read and change parameters of the ventilation system from linked equipment (e�g� a
building management system)� For this purpose, an IQ unit is needed� Please refer to information sheet ModBus (L8000009) at
www�duco�eu for comprehensive information about ModBus�
