Feed the chain Ref.
818
through the car as shown in Figs. 13-14. Pay particular attention to the direction
shown in Figs. 13-14. Pass the chain around the return pulley.
Connect the chain as shown in the photo.
IMPORTANT:
The chain anchor plate (Ref. 819) must connect the chain in a specific position between
the pulley and the car, on the side of the car opposite the release lever. The notch in the anchor plate
must face inwards, as shown in fig. 14
Introduce the chain, the car and the other assembled components into the “U” channel rail. See Figs. 15-16.
The chain anchor plate ref. 819 must be located 13 cm from the centre of the return pulley.
Chain Ref. 818
chain anchor plate Ref. 819
car
release lever
release lever
return pulley
Chain
tensioner
rail
Page 9
Notch on inside
6.3 Assembly of the chain
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Summary of Contents for 8500V-Rol/ DUCATI UP 70 (CTH29E)
Page 6: ...Page 6 90 cm 5 Installation diagram Fig 8 ...
Page 18: ...ITALY RoS ...
