![background image](http://html1.mh-extra.com/html/ducati/xdiavel/xdiavel_owners-manual_2537782334.webp)
Friction material: TT 2182 FF.
Brake master cylinder type: PR18/19.
REAR
With fixed drilled steel disc.
Disc diameter: 265 mm.
Hydraulically operated by a pedal on RH side.
Brake calliper make: BREMBO, floating, with 4
pistons.
Rear brake type: PF 30/32A.
Friction material make: TOSHIBA.
Friction material: TT 2182 FF.
Fixed, 32mm diameter 4-piston calliper.
Warning
The brake fluid used in the brake system is
corrosive.
In the event of accidental contact with eyes or skin,
wash the affected area with abundant running water.
Transmission
Hydraulically-controlled slipper/progressive self-
servo wet multiplate clutch.
Drive is transmitted from engine to gearbox primary
shaft via spur gears.
Front chain sprocket/clutch gearwheel ratio: 33/61.
6-speed gearbox with constant mesh gears, gear
change pedal on left side of motorcycle.
Driven pulley/driving pulley ratio: Z28/Z80.
Total gear ratios:
1
st
gear 15/37
2
nd
gear 17/30
3
rd
gear 20/27
4
th
gear 22/24
5
th
gear 24/23
6
th
gear 25/22
Drive belt from gearbox to rear wheel.
Toothed belt: Z173 L35
Important
The above gear ratios are the homologated ones
and under no circumstances must they be modified.
However, if you wish to tune up your motorcycle for
competitions or special tracks, Ducati Motor Holding
S.p.A. will be pleased to provide information about
the special ratios available. Contact a Ducati Dealer or
Authorised Service Centre.
333
Summary of Contents for XDIAVEL
