manualshive.com logo in svg

Ducati XDIAVEL, Owner'S Manual

Share
Download
Ducati XDIAVEL Owner'S Manual Download Page 23

8) DTC LIGHT (AMBER YELLOW).

This light indicates DTC system enabling/disabling status.

Speed below 5 Km/h (3 mph)

Light OFF

Light flashing

Light steady on

DTC enabled and functioning

DTC enabled but not yet function-

ing since initialisation is in progress

or functioning with degraded per-

formance

DTC disabled and/or not functioning

due to a fault in the BBS control unit

Speed above 5 Km/h (3 mph)

Light OFF

Light flashing

Light steady on

DTC enabled and functioning

DTC enabled but there is a fault in

the system causing degraded per-

formance

DTC disabled and/or not functioning

due to a fault in the BBS control unit

9) "ENGINE DIAGNOSIS - MIL" LIGHT  

 (AMBER YELLOW).

It turns on in the case of "engine" errors and in some cases will lock the engine.

22

Summary of Contents for XDIAVEL




























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands