Ducati SUPERSPORT Owner'S Manual Download Page 220

Page: 220 / 313

Bluetooth control unit

The motorcycle can be equipped with a Bluetooth

control unit that works as a hub between the various

supported electronic devices relying on a Bluetooth

communication interface.

The Bluetooth control unit can be purchased at a

Ducati Dealer or Authorised Service Centre.

Warning

Bluetooth Headset device manufacturers may

incorporate certain changes within the standard

protocols over the course of the lifecycle of the device

(Smartphones and Earphones).

Warning

These changes are outside the control of Ducati

and may result in Bluetooth Headset devices

functionality becoming impaired (sharing Music,

multimedia player, etc.) and may equally affect some

types of Smartphones (depending on supported

Bluetooth profiles). This is why Ducati cannot

guarantee multimedia player proper operation for:

any earphones not coming with the "Ducati Kit

part no. 981029498";

any Smartphones not supporting the required

Bluetooth profiles (even though paired to

earphones coming with the "Ducati Kit part no.

981029498").

Warning

In case of interference or noise due to particular

conditions of the external environment, the Ducati

earphone kit part no. 981029498 also allows sharing

the music being played directly from rider helmet to

passenger helmet (for further details please refer to

the manual of the earphones coming with the Ducati

kit part no. 981029498).

219

Summary of Contents for SUPERSPORT


























































































































































































































































































































Search results

Summary of Contents for SUPERSPORT

Reviews:

Ducati SUPERSPORT, Owner'S Manual, Page: 220 / 313

Search results

Summary of Contents for SUPERSPORT

Reviews: