64
E
Notes
The engine can be started with the sidestand down
and the gearbox in neutral. If starting with a gear engaged,
pull in the clutch lever (in this case the sidestand must be up).
2) Check that the stop switch (2, fig. 52) is positioned to
(RUN), then press the starter button (3, fig. 52).
This model has servo-assisted starting. To use the servo-
assisted starting feature, press the start button (3) and release
it immediately. When you press button (3) the starter motor
runs automatically for a period of time that varies according to
the engine temperature. The system disengages the starter
motor as soon as the engine starts. If the engine fails to start,
wait at least 2 seconds before pressing the start button (3)
again.
Allow the engine to start on its own, without turning the
throttle twistgrip.
Important
Do not rev the engine when cold. Allow some time for
the oil to warm up and reach all points that need lubricating.
2
3
fig. 52
Summary of Contents for SUPERBIKE 1098 Tricolore
