Ducati SUPERBIKE 1098 Tricolore, Use And Maintenance Manual, Page: 29 / 122

29
E
Clock setting
To set the clock, select the “TIME Set” page from the menu.
From this page, if you press button (1, fig. 8) in position B
“
▼
” for 3 seconds, you enter clock setting mode.
On entering this function, the message “AM” flashes on
the display; if you press button (1, fig. 8) in position B “
▼
”,
the message “PM” flashes on the display; pressing button
(1, fig. 8) in position B “
▼
” as second time returns you to
the previous step (if the time is 00:00, when you switch
from AM to PM the time 12:00 will appear);
if you press the button (1, fig. 8) in position A “
▲
”, you can
set the hours, which start flashing. Each time you press the
button in position B “
▼
”, the count advances cyclically in
steps of 1 hour; if you hold the button down in position B
“
▼
”, the count advances cyclically in steps of 1 hour every
second (when the button is held down continuously, the
hours do not flash).
If you press button (1, fig. 8) in position A “
▲
”, you enter
the minutes setting mode and the minute digits will start
flashing. Each time you press the button in position B “
▼
”,
the count advances cyclically in steps of 1 minute; if you hold
the button down in position B “
▼
”, the count advances
cyclically in steps of 1 minute every second. If the button is
held pressed in position B “
▼
” for more than 5 seconds, the
minutes advance by 1 every 100 ms (when the button is held
in position B “
▼
” continuously, the seconds do not flash).
If you switch the button to position A “
▲
”, the system exits
setting mode and displays the newly set time.
flashing
flashing
B
B
B
B
B
A
A
A
A
A
A
setting
flashing
flashing
setting
fig. 23