Ducati Streetfighter, Owner'S Manual

Page: 263 / 272

Type: Stylema
®
monobloc M4.30 b, radial mount
(ABS Cornering EVO)
Number of pistons per calliper: 4
Calliper cylinder diameter: 30 mm (1.18 in).
Friction material: BRM 10 A HH.
Cylinder Ø: 16 mm (0.63 in).
Master cylinder type: PR16/21.
REAR
With fixed drilled stainless steel disc.
Disc diameter: 245 mm (9.6 in).
Brake disc thickness: 5 mm (0.2 in).
Brake disc thickness (maximum wear): 4.5 mm (0.18
in).
Disc braking surface: 219 sq.
cm (33.95 2 )
Hydraulically operated by a pedal on RH side.
Brake calliper make: BREMBO
Number of pistons per calliper: 2.
Piston diameter: 34 mm (1.34 in).
Cornering ABS as standard.
Friction material: Ferodo Ferit I/D 450 FF.
Master cylinder type: PS 13.
Brake calliper master cylinder piston diameter: 13
mm (0.51 in).
Attention
The brake fluid used in the brake system is
corrosive.
In the event of accidental contact with eyes or skin,
wash the affected area with abundant running water.
Transmission
Hydraulically-controlled slipper/self-servo wet
multiplate clutch controlled by the adjustable lever
on left-hand side of the handlebar.
Drive is transmitted from engine to gearbox primary
shaft via spur gears.
Primary drive: 1.80:1
Primary drive: front / rear sprocket ratio: 30/54.
6-gear gearbox with Ducati Quick Shift (DQS) up/
down EVO2, gear change pedal on left side of
motorcycle.
Gearbox output sprocket/rear chain sprocket ratio:
15/42
Total gear ratios:
1
th gear 38/14
2
th
gear 36/17
3
th
gear 33/19
4
th
gear 32/21
5
th
gear 30/22
262