Temperature “TEMP.”:
Use buttons (1) and (2) to select the flashing item
"TEMP.” (Fig 91) and press button (4).
The display shows the 2 available units of
measurement “°C” and “°F”, with the one selected
This phase can be interrupted by pressing button (2)
for 2 seconds.
Otherwise, with buttons (1) and (2) it is possible to
select the desired unit of measurement that will
start to flash. Press button (4) to confirm.
Successively, the display will show the flashing
“TEMP:” indication again (Fig 91).
The modification of the unit of measurement for this
value concerns the following functions:
-
T-AIR
1
2
4
Fig 91
1
2
4
Fig 92
96
Summary of Contents for SCRAMBLER 2020
