Ducati PRO-II, User Manual

Page: 26 / 148

WARNINGS
Read the manual and instructions below in full before using the product.
Product name: Ducati Pro2
Product type: Electric scooter
Year of production: 2020
• Note: To recharge this electric scooter use ONLY the supplied charger labelled
ZH42V1.7ALi with the following output voltage: 41.5V - 1.7A.
• Using another type of charger can damage the product or pose other potential risks.
• Never leave the product to charge unsupervised.
• The charging period of the product must not exceed four hours. Stop charging
after four hours.
• The product should only be charged at temperatures between 0 °C and 45 °C.
• If charged at lower or higher temperatures, there is a risk that the battery will offer
reduced performance, potentially resulting in damage to the product and personal
injury.
• The product must be used only at temperatures between -10 °C and 45 °C.
• If used at lower or higher temperatures, there is a risk that the battery will offer reduced
performance, potentially resulting in damage to the product and personal injury.
• Store the product at temperatures between 0 °C and 35 °C (the optimum storage
temperature is 25 °C)
• Recharge and store in a dry and open place, away from combustibles (i.e. any flammable
element).
• Do not recharge in sunlight or near open flames.
• Do not recharge the product immediately after use. Allow the product to cool for
an hour before charging.
• If you are away for a certain period of time, for example for holidays, and you
entrust the device to a third party, leave it in a partially charged state (20-50%
charge). Not fully charged.
• The product is often supplied partially charged. Leave it in this state until it is ready
to be used.
24