background image

Symbols

To allow quick and easy consultation, this manual uses graphic 

symbols to highlight situations in which maximum care is required, 

as well as practical advice or information.

Pay attention to the meaning of the symbols since they serve to 

avoid repeating technical concepts or safety warnings throughout 

the text. The symbols should therefore be seen as real reminders. 

Please refer to this page whenever in doubt as to their meaning.

Warning

Failure to follow these instructions might give raise to  a dangerous 

situation and provoke severe personal injuries or even death.  

Caution

Failure to follow these instructions might cause damages to the  

vehicle and/or its components. 

Notes

Useful information on the procedure being described. 

References

Parts highlighted in grey and with a numeric reference  
(Example 

1

) are the accessory to be installed and any assembly 

components supplied with the kit. 

Parts with an alphabetic reference (Example 

A

) are the original 

components fitted on the vehicle.

Any right- or left-hand indication refers to the vehicle direction of 

travel.

General notes 

Warning

Carefully perform the operations on the following pages since they 

might negatively affect rider safety.

Warning

Carefully perform the operations on the following pages since they 

might negatively affect rider safety.

Notes

The following documents are necessary for assembling the Kit:

WORKSHOP MANUAL of your bike model.

Notes

Should it be necessary to change any kit parts, please refer to the 

attached spare part table. 

Simbologia

Per una lettura rapida e razionale sono stati impiegati simboli che 

evidenziano situazioni di massima attenzione, consigli pratici o 

semplici informazioni.

Prestare molta attenzione al significato dei simboli, in quanto la 

loro funzione è quella di non dovere ripetere concetti tecnici o 

avvertenze di sicurezza. Sono da considerare, quindi, dei veri e 

propri “promemoria”.

Consultare questa pagina ogni volta che sorgeranno dubbi sul loro 

significato.

Attenzione

La non osservanza delle istruzioni riportate può creare una 

situazione di pericolo e causare  gravi lesioni personali e anche la 

morte.

Importante

Indica la possibilità di arrecare danno al veicolo e/o ai suoi 

componenti se le istruzioni  riportate non vengono eseguite.

Note

Fornisce utili informazioni sull’operazione in corso.

Riferimenti

I particolari evidenziati in grigio e riferimento numerico (Es. 

1

rappresentano l’accessorio da installare e gli eventuali componenti 
di montaggio forniti a kit.

I particolari con riferimento alfabetico (Es. 

A

) rappresentano i 

componenti originali presenti sul motoveicolo.

Tutte le indicazioni destro o sinistro si riferiscono al senso di marcia 

del motociclo. 

Avvertenze generali

 

Attenzione

Le operazioni riportate nelle pagine seguenti devono essere 

eseguite da un tecnico specializzato o da un’officina autorizzata 

DUCATI.

Attenzione

Le operazioni riportate nelle pagine seguenti se non eseguite a 

regola d’arte possono pregiudicare la sicurezza del pilota.

Note

Documentazione necessaria per eseguire il montaggio del Kit 

è il MANUALE OFFICINA, relativo al modello di moto in vostro 

possesso.

Note

Nel caso fosse necessaria la sostituzione di un componente del kit 

consultare la tavola ricambi allegata. 

Kit cover serbatoio camouflage

Camouflage tank cover kit

Scrambler

ISTR - 646 / 00

97380261A

Summary of Contents for Performance 97380261A




























Reviews: