Aligning the headlight
Check correct headlight aiming. Position the
motorcycle 10 m (32.8 ft) from a wall or a screen, the
motorcycle must be perfectly upright with the Tyres
inflated to the correct pressure and with a rider
seated, perfectly perpendicular to the longitudinal
axis. On the wall or surface, draw a horizontal line at
the same height from the ground as the centre of
the headlight and a vertical line aligned with the
longitudinal axis of the motorcycle. If possible,
perform this check in dim light. Switch on the low
beam and adjust right and left beams. The height of
the upper limit between the dark area and the lit area
must not be more than 9/10 of the height from the
ground of the headlight centre.
10 m
9
10
x
x
Fig 162
189
Summary of Contents for PANIGALE
