Ducati Quick Shift does not work when the
clutch lever is pulled.
●
Ducati Quick Shift will shift down (downshifting)
only when the throttle control is completely
closed.
●
If the Ducati Quick Shift strategy does not work
it is always possible to complete the gear
shifting using the clutch lever.
●
If the gear lever is held pressed up or down for
more than 131 seconds (even if just by accident) a
plausibility error can be memorised in the
electronic control unit and the Ducati Quick
Shift system could be disabled; in this case, to
reactivate the system, it is necessary to release
the lever, switch the instrument panel off, wait
for 5 minutes and switch the instrument panel
on again.
●
Ducati Quick Shift is designed to operate above
2,500 rpm.
●
No matter the gear engaged, downshifting with
Ducati Quick Shift (downshifting) only woks
below a set threshold, so as to avoid exceeding
the maximum rpm allowed when the lower gear
is engaged.
103
Summary of Contents for PANIGALE
