![background image](http://html1.mh-extra.com/html/ducati/multistrada-950s-2019/multistrada-950s-2019_owners-manual_2537716286.webp)
Adjusting the position of the
gearchange pedal and rear brake
pedal
The position of the gearchange and rear brake
pedals in relation to the footrests can be adjusted to
suit the requirements of the rider.
Adjust the pedals as follows:
Quick shift rod adjustment
Loosen screw (3) that retains the DQS control (4) to
the gear change lever through rear nut (5) positioned
behind screw (3).
Lock the quick shift rod (4) in the special flat (C) and
loosen nut (1) by extending or shortening the quick
shift rod and thus reaching the desired pedal
position.
Once the position has been reached, tighten nut (1).
Then check the correct value of the distance
between centres (A): it has to be 101.5 mm (4.00 in).
Attention
If the travel value does not respect the
indicated parameters, repeat the adjustment
operations as described before.
C
1
4
C
2
1
5
3
Fig 237
A
Fig 238
285
Summary of Contents for Multistrada 950S 2019
