Ducati Multistrada 1200 ABS, Owner'S Manual

Page: 63 / 199

62
E
“FRONT” adjustment
- the top of the circular display (B, fig. 6) will show the set
compression [C.] and rebound [R.];
- use buttons (1, fig. 7) “
▲
” and (2, fig. 7) “
▼
” to select
the parameter to change and press the reset button (14,
fig. 4);
- the number to change appears on the circular display (B);
- buttons (1, fig. 7) “
▲
” and (2, fig. 7) “
▼
” can increase or
decrease the number (between 1 and 32);
- press the reset button (14, fig. 4) to confirm the new
level.
Note
Increasing the set value “decreases” the hydraulic
“braking”; decreasing the value “increases“ the hydraulic
“braking“ of the shock absorber.
At this point, store the new setting by pressing the reset
button (14, fig. 4) for 3 seconds with “MEMORY” displayed.
The upper indication [C.] or [R.] will be updated to confirm
that the new setting was “received” and stored.
To exit the function, select “EXIT” and press the reset button
(14, fig. 4).