Ducati Multistrada 1200 ABS, Owner'S Manual, Page: 13 / 199

12
E
9) Limiter light “Over rev”/ traction control light “DTC”
(RED) (fig. 3):
(*) depending on the model, each calibration of the Engine
Control Unit may have a different “setting“ for the
thresholds that precede the rev limiter and the rev limiter
itself.
Note
If the Over rev function light and the DTC intervention
light should both come on at the same time, the instrument
panel gives priority to the Over rev function.
10) ABS LIGHTS (AMBER YELLOW) (fig. 3).
This turns on to indicate that ABS is disabled or not
functioning.
(**) The ABS should be considered actually disabled only if
the light continues to flash after starting the engine.
Over rev light
No limiter Off
1st threshold - no. RPM before
the limiter threshold (*) On - STEADY
Rev limiter (limiter engaged due
to overrevving) (*) On - Flashing
DTC intervention
lights
No intervention Off
DTC intervention On - STEADY
Engine off / speed below 5 Km/h
Light off Light flashing Light steady
-
ABS disabled with the
menu function “DISAB
ABS” (**) ABS enabled but not
functioning yet
Engine on / speed below 5 Km/h
Light off Light flashing Light steady
-
ABS disabled with the
menu function “DISAB
ABS” ABS enabled but not
functioning yet
Engine on / speed above 5 Km/h
Light off Light flashing Light steady
ABS enabled
and
functioning ABS disabled with the
menu function “DISAB
ABS” ABS disabled and not
functioning due to a
problem.