![background image](http://html.mh-extra.com/html/ducati/multistrada-1200-abs/multistrada-1200-abs_owners-manual_2537706116.webp)
115
E
Adjusting the position of the gearchange
and rear brake pedals
The position of the gearchange and rear brake pedals in
relation to the footrests can be adjusted to suit the
requirements of the rider.
Adjust the pedals as follows:
Gear change pedal
(fig. 99)
Use an open ended spanner to hold the spherical end on the
rod (1) on the flat (2) and loosen the counter nut (3).
Turn the screw (4) to detach the rod completely from the
gear change lever.
Turn the rod (5), until the gear change pedal is set to the
desired position.
Tighten the screw (4) to secure the gearchange lever to the
rod (5).
Tighten the counter nut (3) onto the spherical end (5).
1
2
3
5
4
fig. 99
Summary of Contents for Multistrada 1200 ABS
