E
66
Replacing headlamp bulbs
Before replacing a burnt-out bulb, make sure that the new
bulb complies with voltage and wattage as specified on
page 88, "Electric System", for that lighting device. Always
test the new lamp before refitting the parts you have
removed.
Fig. 53 shows the position of low beam (LO), high beam
(HI) and parking (1) bulbs in the headlight.
Working on the sides of the fixed headlight fairing, in the
area under the instrument panel (fig. 54), release upper
and lower clips (2) and open cover (3) to gain access to the
headlight bulbs.
Note
For easier reference, the headlight shown is removed
from the vehicle.
3
2
3
3
2
2
fig. 54
1
LO
HI
fig. 53
DUCum_1000DS####03_###e.book Page 66 Wednesday, March 12, 2003 4:33 PM
https://www.motorcycle-manual.com/
