
Clock setup
This function is used to set the clock time.
To set the clock, select the "SET" page from the
menu.
SETTING THE TIME
Holding button (1, Fig 14) pressed in position B " "
for 3 seconds in this menu page gives access to the
setup mode.
When you access this function, the text "AM" flashes;
if you press button (1, Fig 14) in position B " " the
text "PM" flashes; if you press button (1, Fig 14)in
position B " " mode will go back to previous setting
(if it is 00:00, when toggling from "AM" to "PM", 12:00
will be displayed).
-
Pressing button (1, Fig 14) in position A " "
accesses the hour setting mode; the hours start
to flash. Each time you press the button in
position B " " the digit will increase by 1 hour;
if the button is held pressed down in position B
" ", the digit will increase by 1 hour every
second (when the button is held pressed, the
hours do not flash).
-
Pressing button (1, Fig 14) in position A " "
accesses the minute setting mode; the minutes
start to flash. Each time you press the button in
position B " ", the digit will increase by 1 minute.
If you hold the switch down in position B " ",
the count increases cyclically in steps of 1 minute
every second. If the button is held depressed in
position B " " for over 5 seconds, minutes will
increase by 1 minute every 100 ms (while the
button is held depressed in position B " "
seconds do not flash).
-
Pressing the button in position A " " exits setup
mode and the new time is displayed.
66
Summary of Contents for MONSTER 696
