Ducati MONSTER 696, Owner'S Manual, Page: 58 / 182

Lap timer display (LAP)
This function lets you display lap times.
To enable this function, enter the menu and set the
"LAP" function to "On" by holding reset button
(1, Fig 14) in position B " " pressed for 3 seconds.
The lap timer is started and stopped using the high-
beam flasher button FLASH (12, Fig 14) on the LH
switch.
When the LAP function is active, each time you press
the FLASH button, the display will show the lap time
for 10 seconds, before reverting to normal mode.
Up to 30 lap times can be stored. Once the memory
is full, the display no longer stores lap times when the
FLASH headlight button is pressed, and the flashing
message "FULL" is shown on the display for 3
seconds until the times are reset.
MENU
Press B
for 3s
Press B
for 3s
Fig 29
57