manualshive.com logo in svg

Ducati hipermotard 2016, Owner'S Manual

Share
Download
Ducati hipermotard 2016 Owner'S Manual Download Page 218

Attention

If the rear sprocket needs replacing, contact a

Ducati Dealer or Authorized Service Center.

If improperly replaced, this component could

seriously endanger your safety and that of your

passenger, and cause irreparable damage to your

motorcycle.

Frame

Steel tubular trellis with 34mm main tubes.

Die-cast aluminum rear subframe.

Steering head angle: 25.5°.

Steering angle: 35° on the left / 35° on the right.

Trail: 104 mm.

Wheels

Front

Ten-spoke, light-alloy rims.

Size: MT3.50x17"
Rear

Ten-spoke, light-alloy rims.

Size: MT5.50x17"
Both wheel shafts can be removed.

Tires

Front

Pirelli Diablo Rosso II "tubeless" radial type.

Size: 120/70-ZR17
Rear

Pirelli Diablo Rosso II "tubeless" radial type.

Size: 180/55-ZR17

Suspensions

Front

Hydraulic upside-down fork

Stanchion diameter:

1.69 in (43 mm).

Wheel travel:

6.69 in (170 mm).

Rear

Progressive. The shock absorber is adjustable for

rebound and spring preload. At the bottom pivot point

it is connected to a die-cast aluminum single-sided

swinging arm. The whole system gives the bike

excellent stability.

Shock absorber stroke:

2.42 in (61.5 mm).

Rear wheel travel:

5.90 in (150 mm).

216

Summary of Contents for hipermotard 2016







































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands