manualshive.com logo in svg

Ducati hipermotard 2016, Owner'S Manual

Share
Download
Ducati hipermotard 2016 Owner'S Manual Download Page 2

This manual is an integral part of the motorcycle and must remain with it for its entire life.

The manual must accompany the motorcycle if it is sold or transferred to a new owner.

Please store this manual in a safe a place. In case of damage or loss, request a new copy by contacting:

Ducati North America, Inc.

10443 Bandley Drive

Cupertino, California, 95014 

Tel: 001.408.253.0499

Fax: 001.408.253.4099

E-mail: [email protected]

Web site: www.ducatiusa.com

Quality and safety standards of Ducati motorcycles are constantly being updated consequent to the 

development of new design solutions, equipment and accessories. Although the manual includes fully 

updated information at the time of print, Ducati Motor Holding S.p.A. therefore reserves the right to make 

changes without prior notification or without incurring obligations. For this reason, you may note 

discrepancies when comparing some illustrations with your motorcycle.

Any and all reproduction or dissemination of the contents in whole or in part is strictly prohibited. All rights 

are reserved by Ducati Motor Holding S.p.A. Requests for authorizations shall be made in writing to this 

company with specification of the reason.

Summary of Contents for hipermotard 2016







































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands