Ducati DRT 2100, Owner'S Manual

Page: 69 / 74

69
English
Owner’s manual
ROTOTILLERS
69
Mowing bar type E.S.M. (Fig. 6)
a) Slacken off the bolts (O) that lock each of the knife guides (P) in place.
b) Work on bolt (0) ot each knife guide until the knife slides correctly.
c) Re-tighten bolts (0) to tock each knife guide.
Maintenance
AFTER THE FIRST 50 HOURS WORK
1) Change the oil in the mowing barcasing(Fig.7). This operation must be carried out with the oil
hot and the machine standing on a flat surface. Allow the old oil to flow out through plug (R) and
pour in 0.5 litres of new oil of the type (STIMOIL: GEAR POWER ISO 150) through plug (S).
2) Grease the knife head zone (T) and the quick coupling (U) (Fig. 7).
EVERY 3OO HOURS WORK
1)Change the oil in the mowing bar casing as indicated in the previous point 1, (Fig. 7).
Fig. 7 - Houslng oil fill and drain plug and points to be per-odically ubricated.
Technical specifications
- Transmission in oil bath.
- QUICK COUPLING DEVICE OF THE MOWING BAR
In the PTO coupling zone of the mowing bar, the housing is preset to connect to the quick
coupling device of the walking tractor without the use of rods or wrenches.
- TYPES OF MOWING BAR
Two types of mowing bar are available:
1 ) Mowing bar for MEDIUM CUT with a working width of 970 mm.
2) Mowing bar type E.S.M. with a working width ol 970 mm.
Weights
970 MM "MEDIUM CUT" bar = 35 Kg
970 mm "E.S.M." bar = 30 Kg