manualshive.com logo in svg

Ducati Diavel Carbon, Owner'S Manual, Page: 108 / 213

Share
Download
Ducati Diavel Carbon Owner'S Manual Download Page 108

107

Duplicate keys

If you need any duplicate keys, contact the Ducati 
Service network with all the keys you have left.
The Ducati Service Centre will program all the new 
keys as well as any keys you already have.
You may be asked to provide proof that you are the 
legitimate owner of the motorcycle.
The codes of any keys not submitted will be wiped 
off from the memory to make those keys 
unserviceable in case they have been lost.

Immobilizer override procedure

This procedure makes it possible to ”temporarily” 
turn on the motorcycle if the HF (Hands Free) System 
is not working.

Note

The PIN CODE function must be activated by 

entering your 4 digit PIN in the instrument panel, 
otherwise the vehicle cannot be turned on 
temporarily in the case of a malfunction.

Warning

The motorcycle owner must activate (store) the 

PIN code; if there is already a stored PIN, contact an 
Authorised Ducati dealer to have the function 
”reset”. To perform this procedure, the Authorised 
Ducati Dealer may ask you to demonstrate that you 
are the owner of the motorcycle. 

Summary of Contents for Diavel Carbon






















































































































































































































Reviews:

No comments