![background image](http://html1.mh-extra.com/html/ducati/diavel-carbon-abs/diavel-carbon-abs_owners-manual_2537649127.webp)
126
E
Adjusting the front fork
The front fork used on this motorcycle has rebound,
compression and spring preload adjustment.
The settings are adjusted using external adjuster screws.
1) to adjust rebound damping (fig. 113);
2) to adjust spring preload (fig. 113);
3) to adjust compression damping (fig. 114).
Park the motorcycle in a stable position on its side stand.
Turn the knob (1) on every fork leg top with a suitable wrench
to adjust rebound damping.
Turn the adjuster (3) on fork leg bottom with a flat
screwdriver to adjust compression damping. Turn the knob
(1) and the adjusting screws (3) to adjust the dampening. The
stiffest damping setting is obtained with the adjuster turned
fully clockwise to the “0” position. Starting from this
position, turning anticlockwise, you can count the turns.
To change preload of the spring inside each fork leg, turn the
hex. adjuster (2, fig. 113) with a 22 mm hexagon wrench,
starting from the fully open position (clockwise). From
reference (A, fig. 113), every full turn clockwise corresponds
to 1 mm of preload of the spring, up to a maximum of 15 mm,
corresponding to 15 full turns.
1
A
2
fig. 113
-
+
3
fig. 114
Summary of Contents for Diavel Carbon ABS
