manualshive.com logo in svg

Ducati Diavel 2014, Owner'S Manual

Share
Download
Ducati Diavel 2014 Owner'S Manual Download Page 31

Instrument panel on tank displays trip information (set

riding mode, odometer, fuel consumption, average

speed, etc.) as well as the "setting" menus to be used

to enable and adjust the different functions.
1) Menu 1 (TOT, TRIP1, TRIP2, RANGE).

2) Menu 2 (CONS.AVG., CONS., SPEED AVG, TRIP

TIME and AIR) if active.

3) Gear / Neutral indication.

4) Icon indicating fuel level.

5) Engine setting indication for the currently set

riding mode.

6) Currently set Riding Mode.

7) DTC (Traction Control) level indication for the

currently set riding mode.

8) Icon referring to the function indicated under

Menu 2.

9) Side stand open indication.

10355

16.3

3

TOT

CONS.AVG

KM/L

162 HIGH

GEAR

SPORT

03 DTC

SIDE

SIDE

STAND

4

5

9

6

7

8

2

1

3

Fig. 7

30

Summary of Contents for Diavel 2014






























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands