Owner’s manual
English
DGT 2600
GRASS TRIMMER
30
- The guard is fixed to the angle transmission
by two screws.
Warning! Use only original manufacturer's
replacement parts, accessories and
attachments. Failure to do so can cause poor
performance, possible injury and may void
your warranty. Never use the machine without
the guard assembled!
3. Assembly and disassembly of the cutting
head.
3.1 Assembly and disassembly of the
cutting head:
a) Assembly
- Block rotation of the shaft (1) with a proper
wrench.
- Fit the cutting line head (2) screwing it
clockwise.
b) Disassembly
- Block rotation of the shaft (1) with a proper
wrench.
- Remove the cutting line head (2)
unscrewing it anticlockwise.
6. ASSEMBLY
1. Assemble the handle on the machine.
First put hex screws into the handle, second
take handle on the shaft. Assemble the lower
plate into the handle (bottom), and then
tighten the nut knob enough. See the bellowing
pictures.
2.1 Fitting the guard for curved shaft grass
deflector:
- Remove the guard plug (1) from the end of
the bottom part of the rod (2).
- Secure the guard (3) to the support (4) using
the supplied bolts (5)
2.2 Fitting the guard for straight shaft grass
deflector
- Fix the transmission with hex key and wrench
enclosed as standard accessories for
tightening the nuts with the safe guard.
Summary of Contents for DGT 2600
