background image

46

Owner’s manual

English

DBC 4600

• Installing blade guard. Open the blade 

guard and install on the blade, then put the 
pin into the guard notch.

Always place the blade guard on the blade 
when the unit is not in use.
 
Remove the blade guard before using the 
unit. If not removed, the blade guard could 
become a thrown object as the blade begins 
to turn.

Please empty the fuel tank before 
transporting, to avoid the engine leaked.
For avoiding the cutting attachment damaged 
the brush cutter and people. Please removed 
the cutting attachment and at the same time 
resile the brush cutter as factory state and 
then casting all parts into the package.
Before transporting all parts should be 
packed and validated safe.

Storage

• Inspect, clean and repair unit if necessary.
• Remove all fuel from tank.
• Start engine-this will consume all fuel in 

fuelline and carburetor.

• Remove spark plug and pour one tea spoon 

of clean motor oil into spark plug hole of 
cylinder-replace spark plug.

• Store in clean, dry, dust free area.

Do not store in a closed are a where fuel 
vapors can rcach an open flame frorn hot 
water heaters, heaters, furnaces. etc. Store in 
a locked well ventilated area only.

     

Bevel gear

After working (40-50) hours, fill with the right 
quantity of grease. Remove the screw and put 
in the lithium-based grease. Turning the shaft 
manually until grease emerges, then refit the 
wash the screw.

Adjusting carburetor note

Do not adjust carburetor unless necessary.
If you have trouble with the carburetor, see 
your dealer. Improper adjustment may cause 
engine damage and void warranty.

15. TRANSPORT AND STORAGE

Transport

• The engine should be turned off when the 

unit is moved between work areas.

• After the engine has stopped .the muffler is 

still hot. Never touch hot parts such as the 
muffler.

• Confirm that the fuel has not leaked from 

the tank.

• Allow the engine to cool; empty the fuel tank 

and secure the unit from moving before 
transporting in a vehicle, if the blade is fitted 
, always use the blade guardo

Summary of Contents for DBC 4600R





















































Reviews: