Ducati CTR31, Instruction Manual

Page: 25 / 46

25
ENGLISH
13) Electrical and mechanical specifications
Dimensions and weight : 177 x 247 x 92 mm - 1 Kg
Mains power supply : 230 Vac +/- 10%
Stand-by power consumption : approx. 1 W
Operating temperature range : 0 to + 60 °C
Single-phase motor power supply : 230 Vac 1 HP max
Blinker power supply : 230 Vac 40 W max
Courtesy light power supply : 230 Vac 40 W max
Electric lock power supply : 12 Vac 15 W max
Accessories power supply : 24 Vac 2 W max
Motor’s work time : programmable, 0 to 250 sec.
Pause time : programmable, 2 to 250 sec.
Operating frequency : 433,92 MHz
Caution : The unit must be not switched on if the connected loads or the power supply exceed the a.m. limits. Failure to observe this precaution can
result in damage to persons, animals or objects for which the manufacturer cannot be held responsible.
14) Electric connections
5 electric connectors are fitted to the card :
1) J3 6-pole Terminal board for the connection of the devices operating with 230 Vac mains power supply (motor, blinker and courtesy light).
2) J4 13-pole Terminal board for the connection of the devices operating at low voltage (commands, safety devices, electric lock and 24 Vac power
supply output).
3) J2 2-pole Terminal board for the connection of the aerial cable.
4) J1 3-pole Terminal board for the connection of the mains power supply and the ground cable.
5) J7 10-pole connector for the optional connection of a radio receiver card.
Terminal board J3
Terminal1 - 230 Vac blinker power supply phase
Terminal2 - 230 Vac blinker and courtesy light power supply neutral (common)
Terminal3 - 230 Vac courtesy light power supply phase
Terminal4 - 230 Vac motor M1 power supply phase (opening)
Terminal5 - 230 Vac motor M1 power supply phase (closure)
Terminal6 - 230 Vac motor M1 power supply neutral (common)
Note : connect the capacitor of the motor M1 between terminals 4 and 5