background image

SAFETY RULES

7

WARNING!

This machine can be used by people with reduced physical, sensory or mental capabilities

or lack of experience and knowledge if they have been given supervision or instruction 

concerning use of the machine in safe way and understand the hazards involved.

The high pressure stream of water produced can cut through skin and underlying tissue. Never squeeze the trigger or

point the spray gun at other people, animals, plants, or fragile objects such as glass, even if the engine is stopped.

This unit is not a toy. Keep unit away from children and pets.

Do not leave spray gun unattended while unit is running.

Make sure the spray gun, nozzle, and accessories are attached correctly.

Never attempt to repair high pressure hose, always replace.

Never attempt to repair leaks with sealant, always replace O-ring or seal.

Never attempt to connect or disconnect hose from pump or spray gun while system is pressurized.

Always release water pressure from unit every time you stop the engine.

WARNING!

Do not wear loose clothing or gloves.

Remove jewelry or anything else that could be caught in moving parts.

Tie back or wear protective head covering to contain long hair.

WARNING!

High pressure jets can be dangerous if subject to misuse. The jet must not be directed at 

persons, live electrical equipment or the machine itself.

Moving parts can catch on clothing, jewelry, and hair.

 

death.

 

on the unit before starting the engine.

Never smoke while operating or fueling this unit.

When adding or draining fuel, unit should be turned off for at least 2 minutes to cool before removing fuel cap.  If unit

has been running the fuel cap is under pressure, remove slowly.

To keep fuel from spilling, secure unit so it cannot tip while operating or transporting.

When transporting unit, disconnect the spark plug wire and make sure the fuel tank is empty with the fuel shutoff

valve turned to the off position.

WARNING!

alcohol, drugs, medication or you feel tired.

Stay alert and use common sense. Do not operate this unit if you are under the influence of

WARNING!

 

  Allow hot components to cool before touching.

WARNING!

Avoid contacting hot areas of this unit.

Summary of Contents for GSW01A
























Reviews: