12
13
CLEANING AFTER EACH USE
1
FLUSH
3
UNPLUG
2
WIPE
Flush the Steam Wand by
dispensing steam to remove
any milk residue from inside
the Steam Wand after each
use.
Unplug the machine, and
allow to cool.
Thoroughly wipe the Steam
Wand to clean off any milk
residue with a damp cloth.
CAUTION: Steam Wand wlll
be hot.
It is important to clean the DUALIT CINO™ after each use. Make
sure the machine is switched off, unplugged and allowed to cool.
U
N
PL
U
G
WH
EN NO
T IN
U
SE
PL
UG
IN
BEFORE
U
SE
CLEAN
4
CAUTION: Allow Drip
Tray to cool down before
emptying.
Clean Drip Tray
with warm soapy water
using a non-abrasive pad and
dry. Wipe up any Descaler
overspill.
2
DESCALER
3
REMOVE
Purchase Descale Solution
which is suitable for Coffee
Machines. Ensure the Steam
Valve is closed and ensure
the Drip Tray is located
against the front of the
machine.
Depending on the machine’s
status the Indicator Light will
be flashing Green, Amber
or Red whilst warming up.
Once machine is warmed up
the Indicator Light will stop
flashing and remain on.
CAUTION: Remove Water
Tank from machine then
remove Water Filter Holder
from Water Tank. Do not
allow Descale Solution to
come in contact with Dualit
Water Filter. Risk of injury or
contamination!
4
FILL TANK
Fill the Water Tank with
1
litre of Descale Solution.
Follow instructions and
safety precautions on the
Descaler packaging.
If using
granular descaler, ensure
it is fully dissolved before
switching the machine on.
CLEANING & DESCALING
5
6
PLACE CONTAINER
INDICATOR LIGHT
The machine has a Descale Counter. The machine will advise you when a descale
is required based on the number of uses.
If the Indicator Light is
Amber
, machine needs to be descaled immediately.
If the Indicator Light is
Red
, machine has entered Lock Mode, to prevent use until a descale is performed.
DESCALER
WA
TER
U
N
PL
U
G
WH
EN NO
T IN
U
SE
PL
UG
IN
BEFORE
U
SE
1
CLEAN THE
STEAM NOZZLE
Unscrew the Steam Nozzle
anti-clockwise and use a pin
to remove dried milk. If too
tight to unscrew, use an 8mm
spanner. Screw Steam Nozzle
back onto the steam wand,
ensuring it is tight.
Place Water Tank back into
machine. Place a container with
a capacity of more than 2 litres
on top of the Drip Tray, located
under the Steam Wand. Ensure
Drip Tray is located against the
front surface of the machine.
