Dualit 84516, Instruction Manual & Guarantee

Page: 10 / 19

18 19
4 5
Turn the Steam Flow Control
slowly between the ‘off’ and
the ‘steam / water’ position to
adjust the flow of steam. You
will hear the pump operating;
this is quite normal. Risk of
scalding.
To heat milk using steam,
leave the Steam Wand
positioned just under the
surface of the milk. Do
not move the jug. Risk of
scalding.
To froth milk, introduce
air to the milk by slowly
lowering the jug ensuring
the Nozzle remains under
the surface of the milk. Risk
of scalding.
6
FROTHING MILK STEAMING MILK START STEAM
7 8
To stop steaming, turn the
Steam Flow Control to
the ‘off’ position. Press any
button to exit the steam
function. The Pump will
operate to reduce the
temperature to optimum
coffee temperature.
IMPORTANT NOTICE:
After each use, flush the
Steam Wand by
dispensing water
(see page 19) or steam
to remove any milk
residue from inside the
Steam Wand. Wipe the
Steam Wand.
9
Turn machine off by pressing
the Power ON/OFF Switch
after you have rinsed through
and finished using the machine.
This will save energy. Unplug
when not in use.
TURN OFF FLUSH AND
WIPE STOP STEAMING
WHEN SWITCHING FROM STEAM TO COFFEE OR TEA EXTRACTION:
WAIT 10 SECONDS BEFORE REMOVING THE HOLDER AFTER DOSING
FIRST DRINK IS COMPLETE.
1 2
Remove the Froth Nozzle
from the Steam Wand.
Caution: Wand may be
hot . Ensure the Water Tank
is filled with water.
Insert into a deep jug or
teapot and point the Wand
to a side wall to reduce
splashback.
3
Turn the Steam Flow
Control to the steam/water
position. It will start with a
continuous flow then start to
pulse. This is normal. Risk of
scalding.
DISPENSING HOT WATER
CAUTION: WATER WILL BE HOT AND BE DISPENSED AT
HIGH PRESSURE. SUBMERGE THE WAND TO REDUCE
SPLASHING.
START DISPENSING INSERT WAND PREPARE
U
N
PL
U
G
W
HEN N
OT
IN
U
SE
4 5
The flow of water can be
adjusted by turning the
Steam Flow Control
between the ‘off’ and the
‘steam/water’ position. Risk
of scalding.
To stop the flow, turn the
Steam Flow Control to the
‘off’ position. Be careful not
to overtighten.
STOP DISPENSING ADJUST FLOW
Turn machine off by pressing
the Power ON/OFF Switch
after you have rinsed
through and finished using
the machine. This will save
energy. Unplug when not
in use.
6
TURN OFF