4
®
MXC22
INSTALLATION
Remote Turn-On
Connect to amplifier or power
antenna. Insulate wire if not used.
RCA Cable
(sold separately)
Antenna
Connector
BLUE
Rear Preamp Output
Connect to amplifier RCA Input
GREY
Ground
Connect to vehicle
chassis ground.
BLACK
Accessory
Connect to existing ignition
circuit or switched 12 volt source.
RED
Right
Gray/Black (-)
Gray (+)
Left
White/Black (-)
White (+)
AMP
3 AMP
AGC Fuse
.5 AMP
AGC Fuse
Wiring
Diagram
FUSES
When replacing fuses, make sure new
fuse is the correct type and amperage. Using an
incorrect fuse could damage radio. The MXC22 uses
one 3 amp AGC fuse (Ignition) and one .5 amp AGC
fuse (Remote turn-on) located in-line.
