10
7- IMPORTANT SAFETY INFORMATION
7.1 Fire prevention:
Never locate the fixture on any flammable surface.
Minimum distance from flammable materials: 10 cm.
Minimum distance from the closest illuminable surface: 10 cm.
7.2 Prevention from electric shock:
High voltage is present inside the unit.
Unplug the unit prior to performing any operation which involves touching the inside of
the unit.
This equipment must be grounded, do not connect to non-grounded supplies.
The use of a thermal magnetic circuit breaker is recommended for each FOS 100
POWER SOLO unit.
Use only AC supplies 90-260V, 50 / 60 Hz.
FOS 100 POWER SOLO (IP20) should never be located in position exposed to rain or in
areas of extreme humidity.
A good air ventilation is essential for proper equipment work.
7.3 Safety:
The external surface of the unit may exeed 50°C; ne ver handle the unit until at
least 5 minutes have elapsed since the unit was turned off.
Never install the unit in an enclosed area lacking sufficient air flow.
The ambient temperature should not exeed 40°C and s hould not be lower than -10°C.
F
!
10cm
Summary of Contents for FOS 100 FULL RGBW
Page 12: ...12 FOS 100 POWER IP65 M16 LED input Male cable connector ...
Page 29: ...29 NOTES ...
Page 30: ...30 NOTES ...
Page 31: ...31 NOTES ...