DTS DRIVENET 1664, User Manual, Page: 22 / 47

User Manual
Ver. 1.00 20 di 43
DRIVENET
11 Display Functions
11.1 LCD Display Functions
The DRIVENET 416 / 416 POWER / 832 / 832 24Vdc / 832 POWER / 832 POWER 24Vdc / 1664 / 1664 24Vdc
display panel shows all the available control menus.
By selecting the available functions on these
menus, you will be able to change the fixture’s
settings and behavior.
Beware that changing these settings may vary
the operating functions of the unit so that it
may not respond correctly to the signal given to
it. Carefully read the instructions and tables
below before carrying out any variations or
selections.
MENU
• To access the control menus in the display panel.
• To return to the previous level in the menu structure without making a
change.
•
To exit the menus.
ENTER
• To select any required menu.
• To confirm any changes.
UP / DOWN
•
To navigate the menus structure.
•
To scroll between any value.
FIRMWARE RELEASE
1.19 (DRIVENET 416 / 1664)
1.13 (DRIVENET 416 POWER / 832 / 832 24Vdc /
1664 24Vdc)
RDM Device Model ID 0x0D21/2E
DMX Personality IDs 0x01 “FULL TYPE 8 BIT 16 / 32 / 64 ch”
MAIN MENU LEVEL 1 LEVEL 2 LEVEL 3 FUNCTION
DISPLAY
POSITION
ON THE GROUND
Reverses display's reading
depending on the mounting
position. On the ground or
suspended.
Default = ON THE GROUND
SUSPENDED
STANDBY
OFF
Display stand-by disabled.
(Default)
ON
Display goes OFF after 30
seconds (10 seconds for
DRIVENET 416)
TOUCH SCREEN
CALIBRATION
To calibrate the touch screen
DMX SETUP DMX MODE
FULL TYPE 8 BIT 16 /
32 / 64CH
Full type – 8 bit = 16 / 32 / 64
DMX ch ( default) = RGBW 4
ch each output: 1-Red, 2-
Green, 3-Blue, 4-White.
FULL TYPE 16 BIT 32
/ 64 / 128 CH
Full type – 16 bit = 32 / 64 /
128 DMX ch mode = RGBW 2
ch each colour; 8 ch each
output: 1-Red 8 bit, 2-Red 16
bit, 3-Green 8 bit, 4-Green 16
bit, 5-Blue 8 bit, 6-Blue 16 bit,
7-White 8 bit, 8-White 16 bit.