DTS ALCHEMY 5, Manual, Page: 19 / 61

RDM – DMX – Manual Ver. 1.08 17 di 58
ALCHEMY 5
MAIN MENU LEVEL 1 LEVEL 2 LEVEL 3 FUNCTION
BEAM SHP R-I 0 - 255
Default = 0
ZOOM 0 - 255
Default = 128
* Refer to User Manual for Motors and LED Driver PCBs details.
6 Error Messages
ERROR SHOWN ON DISPLAY APPEARS WHEN
PAN
-Pan motor fault
-Pan encoder fault
-Pan motor driver on Pan&Tilt PCB fault
-Wiring connection between Pan encoder and Pan&Tilt PCB fault
PAN LOCKED
-Pan locked
-Pan motor fault
-Pan encoder fault
-Pan motor driver on Pan&Tilt PCB fault
-Wiring connection between Pan encoder and Pan&Tilt PCB fault
TILT
-Tilt motor fault
-Tilt encoder fault
-Tilt motor driver on Pan&Tilt PCB fault
-Wiring connection between Tilt encoder and Pan&Tilt PCB fault
TILT LOCKED
-Tilt locked
-Tilt motor fault
-Tilt encoder fault
-Tilt motor driver on Pan&Tilt PCB fault
-Wiring connection between Tilt encoder and Pan&Tilt PCB fault
PAN ZERO SENSOR LINE
-Pan magnet missing
-Pan hall sensor PCB fault
-Wiring connection between Pan hall sensor PCB and Pan&Tilt PCB fault
TILT ZERO SENSOR LINE
-Tilt magnet missing
-Tilt hall sensor PCB fault
-Wiring connection between Tilt hall sensor PCB and Pan&Tilt PCB fault
TEMP. LED MOD.
LED module temperature detected under -10°C or over 80°C.
Unit immediately goes in black-out.
TEMP. LED DRV1
Output from 1 to 4 of LED Driver PCB* temperature detected under -10°C
or over 90°C.
Unit immediately goes in black-out.
TEMP. LED DRV2
Output from 5 to 8 of LED Driver PCB* temperature detected under -10°C
or over 90°C.
Unit immediately goes in black-out.
TEMP. LED MICRO
Micro controller on LED Driver PCB* temperature detected under -10°C or
over 80°C.
Unit immediately goes in black-out.
R/G/B/A/C/L OPEN
(not yet implemented)
LED channel in open circuit.
Unit immediately goes in black-out.
R/G/B/A/C/L SHORT
(not yet implemented)
LED channel in short circuit.
Unit immediately goes in black-out.
SUPPLY VOLTS TOO LOW
PCBs input voltage <46,5Vdc.
SUPPLY VOLTS TOO HIGH
PCBs input voltage >49,5Vdc.
BUS 5 MOTORS CARD
-Pan&Tilt PCB driver fault
-5 Motors PCB driver fault
-5 Motors PCB input voltage missing
-Internal Bus wiring connection fault
BUS LED DRIVER CARD
-Pan&Tilt PCB driver fault
-LED Driver PCB driver fault
-LED Driver PCB input voltage missing
-Internal Bus wiring connection fault
BUS ARTNET CARD
-Pan&Tilt PCB driver fault
-Art-Net PCB driver fault
-Art-Net PCB input voltage missing
-Wiring connection between Art-Net PCB and Pan&Tilt PCB fault
ZOOM DX
OR RESET LINE 4
-Zoom DX motor fault
-Zoom DX motor driver on 5 Motors PCB fault
-Zoom DX magnet missing
-Zoom DX hall sensor PCB fault
ZOOM SX
OR RESET LINE 3
-Zoom SX motor fault
-Zoom SX motor driver on 5 Motors PCB fault
-Zoom SX magnet missing
-Zoom SX hall sensor PCB fault