DTS ALCHEMY 5, Manual, Page: 11 / 61

RDM – DMX – Manual Ver. 1.08 9 di 58
ALCHEMY 5
OUTPUT RESPONSE TIME OUTPUT_RESPONSE_TIME_DESCRIPTION
18 SMOOTH 17 (425 ms)
19 SMOOTH 18 (450 ms)
20 SMOOTH 19 (475 ms)
21 SMOOTH 20 (500 ms)
FURTHER RDM MESSAGES:
MODULATION FREQUENCY MODULATION FREQUENCY DESCRIPTION
1 610 Hz
2 800 Hz
3 1.000 Hz (default)
4 1.500 Hz
5 2.000 Hz
6 2.500 Hz
7 3.000 Hz
8 3.500 Hz
9 4.000 Hz
10 4.500 Hz
11 5.000 Hz
RDM MANUFACTURER’S SPECIFIC PIDs:
RDM CUSTOM PID DESCRIPTION
0x8000_ETHERNET_TO_DMX
Set parameter NETWORK - ETH TO DMX
0 = OFF (default)
1 = ON
0x8001_INPUT_PRIORITY
Set parameter NETWORK - PRIORITY
0 = DMX PORT (default)
1 = ETHERNET PORT
0x8002_DISPLAY_STANDBY
Set parameter DISPLAY - STANDBY
0 = DISABLED (default)
1 = ENABLED
2 = FORCED ENABLED
RDM STATUS MESSAGE IDs:
Status Message ID Data Value 1 Data Value 2 Status ID Description
0x8000 ERROR PAN MOTOR/ENCODER
0x8001 ERROR PAN LOCKED
0x8002
ERROR PAN ZERO SENSOR
0x8003 ERROR TILT MOTOR/ENCODER
0x8004 ERROR TILT LOCKED
0x8005 ERROR TILT ZERO SENSOR
0x8006
ERROR DMX ADDRESS
0x8007 ERROR PARAMETERS MEMORY
0x8008 ERROR SUPPLY VOLTS TOO LOW
0x8009 ERROR SUPPLY VOLTS TOO HIGH
0x800A
ERROR BUS ARTNET CARD
0x800B ERROR BUS LED DRIVER CARD
0x800C card number ERROR BUS MOTORS CARD %d
0x8013 ERROR ZOOM