8- DMX ADDRESSES:
A.R.C. To use 4 DMX channels.
Projector 1 A1
Projector 2 A11
Projector 3 A21
.....A...
Projector 6 A51
Projector 1 A1
Projector 2 A17
Projector 3 A33
....A...
Projector 6 A65
If you are using a DMX controller with 10 channels per projector set the following addresses
If you are using a DMX controller with 16 channels per projector set the following addresses
The address that has to be set on each projector generally depends on the number of channels that the DMX
mixer allots it.
If you have a 12 channel controller, set your
to 10 CH MODE. The first projector will have an A001
address and if you want to select the next projector, then you have to add 12. The subsequent address will
then be A0013
A.R.C.
NB: The A.R.C. Needs a controller with at least 24 DMX channels to function properly.
For the next projector it is sufficient to add
For the next projector it is sufficient to add
.
“ 10”
“ 16”
9- CHANGING THE DMX ADDRESS
1) Press the UP-DOWN key until you reach the required DMX number. The numbers on the display will start
to flash (but the new DMX address hasn't yet been set).
2) Press ENTER to confirm your selection. The numbers on the display will stop flashing and the projector is
now controlled by the new 512 DMX number.
WARNING: if you press the UP-DOWN keys together the channels are calculated more quickly and you get
a faster selection
9
www.bluelight.at
