1- TECHNICAL FEATURES
2- IMPORTANT SAFETY INFORMATION
Dmx colorchanger for architectural lighting internal or outdoor use ( Ip65)
Power supply
Power consumption:
Lamp:
Control:
Automatic mode
Linear dimmer
Shutte
Colours:
2 light beam angles (40° / 64°)
Working position: any position
Weight:
A.R.C.
A.R.C
: 230V 50-60 Hz
200 VA for CDM-T 150 lamp 300VA for MSD 250 lamp with in-built
factor correction
CDM-T 150 or MSD250 discharge lamp
4 channels DMX 512
8 dichroic filters with high chromatic yeld + white,
Different rotating speeds to produce RAINBOW effect.
15,5 kg
-
uses a MSD250 or CDM-T 150 . The use of any alternative lamp is not
recommended and will null and void the fixture's warranty.
-Minimum distance from the closest illuminable surface: 0,5 m.
-Replace any blown or damaged fuses only with those of identical value. Refer to the wiring
diagram if there is any doubt.
-Connect the projector to mains power via a thermal magnetic circuit breaker.
-High voltage is present inside the unit. Isolate the projector from the mains supply prior to
performing any function which involves touching the inside of the unit, including lamp
replacement.
-The level of technology inherent in the
. requires the assistance of specialised
personnel for all servicing. Refer all work to your authorised DTS service centre.
-A good earth connection is essential for proper functioning of the projector.
Never connect the unit without proper earth connection.
-Never turn the lamp on if the glass damaged. It respective shielding functions will only
operate efficiently if it is in perfect working order.
-Never look directly into the lamp when it is on.
2.1- Fire prevention:
2.2- Prevention of electric shock:
2.3- Protection against ultraviolet radiation:
r: strobe max 8 flash/sec
4
www.bluelight.at