DTM System
spółka z ograniczoną odpowiedzialnością spółka komandytowa
2.10. Setting channel operating mode on bistable or momentary.
To set the operation channel C1/C2, press and release the C1/C2 button. Red LED C1/C2 lights on and yellow LED indicating
currently set working mode lights on. Press repeatedly C1/C2 button, to set desired mode of operation. The yellow LED with
MOM description set momentary mode, the LED with BIST description - bistable mode. To confirm the selected operating
mode, press and holdC1/C2 button.C1/C2 LED blinks, andC1/C2 and MOM/BIST LEDs light off.The operating mode is saved.
Pressing the other channel button while programing will leave procedure without saving.
1
2
3
4
PRESS C1/C2 BUTTON
LED LIGHT
C1/C2 + MOM / MONO / BIST
PRESS C1/C2
TO LIGHT MOM/BIST LED
CONFIRM BY PRESSING
AND HOLDING C1/C2
Fig.13.
Setting bistable or momentary mode.
868
433
PWR
C1
C2
MOM
MONO
BIST
G/LOCK
PWR
C1
C2
MOM
MONO
BIST
G/LOCK
868
433
PWR
C1
C2
MOM
MONO
BIST
G/LOCK
868
433
PWR
C1
C2
MOM
MONO
BIST
G/LOCK
2.9.The service lock enable / disable.
To enable / disable the service lock you must have "master" remote (point 2.8.).
To enable / disable the service lock press five times in no more than 5 seconds, in receiver radio range, any button of the
"master" remote.Service lock enabling signalsG/LOCK LED on, service lock disable signalsG/LOCK LED off.
Service lock is deleted after memory format of the receiver (pint 2.12.).
2
3a
3b
1
5x
Fig.11.
The service lock enable / disable.
868
433
PWR
C1
C2
MOM
MONO
BIST
G/LOCK
PWR
C1
C2
MOM
MONO
BIST
G/LOCK
PWR
C1
C2
MOM
MONO
BIST
G/LOCK
„MASTER” REMOTE
PRESS 5 TIMES
ANY BUTTON
OF „MASTER” REMOTE
IN RECEIVER
RADIO RANGE
G/LOCK LED ON
- SERVICE LOCK ON
G/LOCK LED OFF
- SERVICE LOCK OFF
