2. RECEIVER PROGRAMMING
MICRO2 receiver has ability to program parameters of work. Before programing refer to Figure 2. showing view of mainboard,
programming buttonsC1 andC2 and LEDs location.
2.1 Adding remote to receiver memory
When receiver is on the working mode, press and hold programming button of chosen channelC1/C2. Red LEDC1/C2 lights on,
then press chosen remote button.Successful adding is indicated by LEDC1/C2 blinking.
2.2. Deleting remote from receiver memory
To delete remote from memory press and hold simultaneously receiver both C1 and C2 buttons. All LEDs blink, then press
any button of remote that you want to delete. Successful deleting is indicated by C1 LED blinking.
Pressing C1 and C2 buttons over 10 seconds will format receiver memory. (see section 2.12)
1
PRESS AND HOLD
C1 AND C2 BUTTONS
2
3
ALL LEDs BLINK
OUT, MOM, MONO, BIST
PRESS BUTTON OF REMOTE
YOU WANT TO DELETE
4
C1 LED BLINKS
- DELETING SUCCESSFUL
2
3
4
1
PRESS AND HOLD
C1/C2 BUTTON
C1/C2 LED LIGHTS
PRESS CHOSEN
BUTTON ON THE REMOTE
C1/C2 LED BLINKS
- ADDING SUCCESSFUL
DTM System
spółka z ograniczoną odpowiedzialnością spółka komandytowa
Fig. 4.
Deleting a remote.
Fig. 3.
Adding a remote.
868
433
PWR
C1
C2
MOM
MONO
BIST
G/LOCK
PWR
C1
C2
MOM
MONO
BIST
G/LOCK
PWR
C1
C2
MOM
MONO
BIST
G/LOCK
868
433
PWR
C1
C2
MOM
MONO
BIST
G/LOCK
PWR
C1
C2
MOM
MONO
BIST
G/LOCK
PWR
C1
C2
MOM
MONO
BIST
G/LOCK
