73
3.OPERATING MODEWITHCOMPUTER BYUSB PORT
MAX2 receiver is equipped with the microUSB connector for connecting to the computer. The case of the receiver is
equipped with the opening which enables the access to the microUSB connector. Thanks to this it is possible to connect
the cable without the need to take off the cover.Connecting the receiver with the computer is indicated by showing 'U' on
the display. Managing of the receiver takes place with the dedicated software:USB PROGRAMMER. Program interface is
simple and intuitive.
To connect the receiver to the computer it is necessary to:
- connect the receiver to the computer with standard microUSB cable, ‘U’ appears on the display,
- install dedicatedUSB PROGRAMMER and drives available at www.dtm.pl.
Details of programming option are included inUSB PROGRAMMER manual.
Powering of the receiver can be with the use of USB port of the computer without the need to connect the outside
power unit.
In case of connecting the receiver with the computer and using outside aerial do not connect it with its earthed
elements.
In case of connecting the computer with USB cable to the already powered receiver, remember that both devices
(the power unit and the computer) should be powered from the same phase.
EN
