59
A
A
A
3
4
Fig. 9.
Declaring the remote control
without its physical presence.
1
2
Remote
to move
in the menu
Declaring the remote control without its physical presence (fig.9):
- pressA button of the receiver while PP option on the display
- with ‘-3’ on the display press A button again, it causes the first digit of
hundreds of remote position number to show on the display. Using up-
down buttons set the appropriate value, next using right-left buttons set
appropriately the digits of tens and unity of the position number of the
remote control that is supposed to be edited. At this moment the edited
digit pulses. Digit of hundreds is shown as single digit and digits of tens
and unity as shown next to each other at the same time, from left tens
and unity digit.
- pressA button to confirm the position number of the remote that is to
be edited
- pressA button again to get access to sub-options enabling the edition
of the remote control.
- registering.The position number in the memory of the receiver will be
shown on the display. At first, hundreds of the number, then tens and
ones (fig.6). Press A button of the receiver to confirm the displayed
position number
EN
