63
1
2
3
4
A
A
A
A
back to PP
Fig. 13.
Removing the remote.
2.2.2.4. Removing the remote control
UP
option is used to remove remote controls from the memory of the receiver.
Removing the remote from the memory shall leave its position number free. It will be
assigned to the remote assigned in the future. All the other numbers of the existing
remotes shall not change.
To remove the remote control from the memory of the receiver (fig.13) it is necessary
to:
- declare the remote control for edition (pt. 2.2.2)
- choose with up/down buttons ‘UP’ option, confirm the choice withA button
- pressA button 3 times to confirm whileA3 option shows on the display.The remote
is removed.
Withdrawing from the changes takes place after pressing B button on the
receiver.
To keep the position number and the order of remaining remote controls in
case of temporarily removed remote control instead of removing the remote it
is possible to disconnect all channels from the buttons (see pt. 2.2.2.2 ).
EN
REMOTE
