Revision 19.1
SOLO7 Transmitter User Guide
Copyright © 2013 Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence
Page 5-30
Name
Options
Notes
De-interlace Option
Button
Blue=OFF
Orange=ON
When on, the de-interlace option converts interlaced
fields to a progressive frame. This improves picture
quality on PC monitor type devices. Having a
progressive type of image is also easier to encode so
you save bit rate too.
Don’t use it if you want to preserve vertical
resolution or interlaced field rate.
Sub-horiz resolution
Full
3/4
2/3
1/2
1/4
This is the fraction of the horizontal video resolution.
Sub vert resolution
Full
1/2
1/4
This is the fraction of the vertical video resolution.
Note
: Dependent on the type of video content, when
using a sub-vertical resolution, you may want to
enable the de-interlace option as well.
Sub frame rate
Full
1/2
1/4
1/8
1/24
If full frame rate is giving poor quality, you can step
this down until you get an acceptable picture.
Note
: Using a sub-frame rate will force the Encoding
mode to Standard delay progressive.
Manual video bitrate
Auto or User defined
Normally left in automatic. Press the Pencil button to
manually set the video bit rate you want to use.
H.264 encoder profile
Baseline
Main
High (4:2:0)
High (4:0:0)
High (4:2:2)
This will default to High (4:2:0).
This should be left at default unless an advanced
user.
ANC Encoder Enable
Blue=OFF
Orange=ON
SDI cameras/sources may include ancillary
metadata. Set to ON to add ancillary data.
5.7.3
SDI Video
Not applicable for the SOL7TX.
