SOL8SDR Hardware Guide
Commercial in Confidence
Revision 8.0
The information contained in this document is the property of Domo Tactical Communications (DTC) Ltd.
Any copying or reproduction in any form whatsoever is prohibited without the written permission of DTC.
© 2016 Copyright Domo Tactical Communications (DTC) Limited. All rights reserved.
Page 3-13
No
Item
Purpose
3
Harwin Gecko 34-way
header
This header accepts D1804 Gecko breakout PCB supplied with the unit
which breaks out to:
Power in, power out, Ethernet, PTZ control, RS232 debug, PA control,
headphone out, and left and right microphone inputs.
For pinout of the Gecko breakout PCB see
section 3.6
Note
: If you have a power amplifier, you will need the D1806 PCB. For
integration, read the
SOL8SDR-C OEM Integration Document
.
4
MCX jack (socket)
SDI-1 video connects here.
5
MCX jack (socket)
SDI-2 video connects here.
6
USB 3.0 Micro-B jack
Use DTC cable AP007377 to connect to your PC.
A USB to serial adaptor can be used for serial data transfer.
If you want to attach USB peripheral devices, you will need a suitable
micro B to type A female adaptor.
3.3.2
Rear Panel
No
Item
Purpose
1
Threaded mounting
British Standard Whitworth (BSW) 1/4” x 20 for mounting.
2
SMP 50 jack (pin)
Telemetry antenna connects here.
