Revision 19.0
SOLO7 Transmitter Family User Guide
Copyright © 2013 Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence
Page 5-68
5.12.3
Update the Front Panel Interface Menu Structure
Once you have upgraded the front panel interface, the menu structure will also need to be updated.
1.
Ensure the OBTX is not powered then connect USB control cable (CA0343) to the
CTRL
connector on the
unit.
2.
Extract the contents of
D588-full-menu_vX_X.zip on your PC.
3.
Power up the OBTX.
4.
Navigate to the location of the extracted files and double click the
update.bat file. A Command window
will open and cycle through COM ports to find the D588. Once found it should take around 20 seconds
to upload the menus and produce an output similar to that shown below.
5.
Once completed, the menu structure will have been updated and the command window will close.
5.12.4
Configure the Front Panel Interface Settings
1.
Power up the up the OBTX.
2.
Using the front panel interface, navigate to
Local Settings>Menu Level
and check this is set to
Full
.
3.
Using the front panel interface, navigate to
Local Settings>SOLO4 FP
and check this is set to
On
.
4.
Using the front panel interface, navigate to
Local Settings>LEDs
and check this is set to
Off
.
5.
Navigate back to the default view on the front panel with the
X
button.
6.
Confirm the front panel appears similar to that shown below.
