Revision 19.0
SOLO7 Transmitter Family User Guide
Copyright © 2013 Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence
Page 5-65
4.
Ensure you have Tera Term selected on the PC and switch on the power supply to the OBTX.
5.
Almost immediately press the
x
key, this will start the S-Record loader, then type a capital
A
(
shift
+
a
)
to select Full upgrade, or capital
L
(
shift
+
l
) if only uploading a logo file.
6.
The erase could take a couple of minutes to complete. Progress is shown by an increasing number of
#
characters. Once complete
Download code:
will be shown in Tera Term.
7.
Select
File>Send File
and ensure the
Binary
checkbox is checked as shown below. Select the upgrade
file and click
Open
.
8.
A progress box will appear as shown below. This will disappear once the file transfer is complete.
Progress is also shown by an increasing number of
–
and
+
characters on the terminal display.
9.
When the file transfer is complete, the OBTX will respond on Tera Term with a series of messages.
Verifying
followed by
Programming
with progress characters.
