* *
Public Address System
DVD/Radio/Cassette/Broadcast Power Amplifier
10
1
．
Radio Receiving
Press
“
TUNER
”
key to access to radio mode, and the equipment will select built-in tuner as the sound source. If
the sound source was selected at the last shut-down, the equipment will access to radio state at the current
start-up, and the corresponding indicator is on.
“
TUNER
”
will be displayed for 1 second on the screen, and the
equipment will return to the received band, preset memory frequency or non-preset memory frequency at the last
use of radio sound source. At this moment, the following operations can be performed to the radio sound source.
Ø
Band selection: Press BAND key to switch between FM and AM bands.
Ø
Auto station search: Press and hold the DOWN or UP key for over 1 second, and the equipment will
automatically search for stations towards high frequency or low frequency, and the frequency displayed on the
screen will continuously flash. When a station is found, the frequency on the screen stops flashing, and the
current frequency found will be displayed on the screen. When the found signal is stereo signal and is strong
enough,
“
STEREO
”
sign will be lit on the screen; otherwise, the sign won
’
t be lit or flash.
Ø
Manual station search: Slightly press the DOWN or UP key (held for not more than 1 second), and the equipment
will step once (50kHz per step for FM, and 9kHz per step for AM) towards high frequency or low frequency, and
the corresponding frequency will be displayed on the screen. Manual station search is suitable for searching a
station of which signal is weak.
Ø
Station Storage: After a station is found, the station can be stored to the preset station storage No. by followings:
Press MEMO key, and
“
MEM
”
sign and a preset storage No.
“
CHXX
”
will flash on the right top corner of the
screen. Press M-DOWN or M-UP key to select one of the storage Nos. from CH10 to CH20, and then press the
MEMO key again to store the station found to the storage No.. After that, press M-DOWN or M-UP key to call
the station of the storage No.
2. Tape Playing
Press key
Tape
of the selector to play tape. Clean the magnet head after 10 hours playing so that the voice
quality is as fidelity as possible. After playing for 20-30 hours should delete the magnet by playing
magnet-deleting tape.
Ø
Insert / Take out Tape
Press the symbol
STOP/OPEN
to open the door of deck, insert or take out a cassette
tape and then close it.
Ø
Rewinding
Press
to rewind the tape.
Ø
Fast forward
Press
to
forward the tape.
Ø
Tape playing:
Press
or
to play the tape, after playing one side the system will rewind automatically to
play another side. Press
to have it stopped.
Ø
Record:
Only stop status, press
●
to record the tape. you can record from the CD, tuner, AUX or MIC.
adjust the main volume controlling button, until LED element 3 (+6dB) and LED element 4 (+8dB)
shall flash
.You can not record if tape is protected.
3. Using External Signal
Press key
AUX
for selecting external program from
AUX
port on rear panel.
收音及其他播放模式
R
adio and other broad cost mode
